Solidor Pembroke Composite Traditional Door In White
Or buy now and pay nothing for 9
months
19.9% APR Representative
inc VAT. Delivery Calculated at Checkout
| Frame Options | |
| Unknown Data Type |
| Door Options | |
| Unknown Data Type |
| Accessories | |
| Unknown Data Type |
| Technical | |
| Unknown Data Type |
| Measurements | |
| Unknown Data Type |
| Upgrades | |
| Unknown Data Type |
Step 1 - Viewed from the outside
Width: Measure in 3 points; top, middle and bottom and take the smallest measurement and deduct 10mm.
Step 2 - Viewed from the outside
Height: Measure again in 3 points; left, centre and right and take the smallest measurement and deduct 10mm. Measure to the underside of the existing cill unless it is NOT going to be replaced i.e concrete cill.
Step 3 - Viewed from the outside
Diagonals: Ensure the opening is square by measuring the diagonals as shown in red. There should be no more than 5mm difference between each measurement.
Step 4 - Viewed from the inside
Repeat the process from the inside of the door from plasterwork to plasterwork and make note of the smallest measurements as before
