Smart Alitherm 400 Aluminium Glazed Door
Our stunning Smart Aluminium glazed doors are a high security, modern and stylish entrance door perfect for porches, back doors, side doors and garages.
Or buy now and pay nothing for 9
months
19.9% APR Representative
Our stunning Smart Aluminium glazed doors are a high security, modern and stylish entrance door perfect for porches, back doors, side doors and garages.
Available with a quick-glaze bead for faster installation, these aluminium doors offer a stronger and more stylish alternative to uPVC or timber.
|
Brand/Model
Smart Alitherm 400 Glazed Doors |
Smart Alitherm 400 Glazed Doors |
|
Material
Aluminium |
Aluminium |
|
Delivery Time
2-3 weeks |
2-3 weeks |
|
Glazing
28mm Double Glazed/40mm Triple Glazed |
28mm Double Glazed/40mm Triple Glazed |
|
Cill Options
85mm, 150mm, 190mm and 225mm |
85mm, 150mm, 190mm and 225mm |
|
Standard Colours
Black, Grey, White, Grey on White, 200+ Bespoke RAL Colours |
Black, Grey, White, Grey on White, 200+ Bespoke RAL Colours |
|
Handle Colours
White, Chrome, Satin, Gold, Grey and Black |
White, Chrome, Satin, Gold, Grey and Black |
|
Guarantee
10 years |
10 years |
*Delivery time is a typical example and is dependent on postcode and current workload.
|
Frame Depth
70mm |
70mm |
|
Sash Depth
70mm |
70mm |
|
Sightlines
129.5mm |
129.5mm |
|
Max Height
2400mm |
2400mm |
|
Max Width
1100mm |
1100mm |
|
Max Sash Weight
100kg |
100kg |
|
U Value
1.4 W/m²K (double glazed) or 1.1 W/m²K (triple glazed) |
1.4 W/m²K (double glazed) or 1.1 W/m²K (triple glazed) |
|
Air Permeability
Class 4 600Pa |
Class 4 600Pa |
|
Water Tightness
Class 3A 100Pa |
Class 3A 100Pa |
|
Resistance to Wind Load
Class C3 |
Class C3 |
|
2022 Document L compliant
Yes |
Yes |
|
Security
PAS24 |
PAS24 |
Step 1 - Viewed from the outside
Width: Measure in 3 points; top, middle and bottom and take the smallest measurement and deduct 10mm.
Step 2 - Viewed from the outside
Height: Measure again in 3 points; left, centre and right and take the smallest measurement and deduct 10mm. Measure to the underside of the existing cill unless it is NOT going to be replaced i.e concrete cill.
Step 3 - Viewed from the outside
Diagonals: Ensure the opening is square by measuring the diagonals as shown in red. There should be no more than 5mm difference between each measurement.
Step 4 - Viewed from the inside
Repeat the process from the inside of the door from plasterwork to plasterwork and make note of the smallest measurements as before
